AcqKnowledge 3.8.2 and above for Windows allows you to synchronize video files with physiological data. This allows you to jump to specific points in either the video or data file, and the corresponding data or video will jump to the correct time point. If you use a visual presentation system such as SuperLab, you can jump to the event markers in the data file and view the corresponding video.
Use an OUT103 LED cable to synchronize the video camera to the MP System. OUT3 connects to one of the analog output connectors on the UIM100C; to use OUT103 with an MP36R unit, add BSLCBL6 interface cable and OUT3 adapter. In the software menu, under MP1XX>Setup Stimulator, use the stimulator settings to turn on the LED when the MP system starts recording data. Make sure that the video camera is recording and place the LED somewhere in view of the camera so that when you start recording you will see the LED turn on. When you review the video, you will see the LED turn on and that marks the start of the data acquisition. Use the timing tools in AcqKnowledge to synchronize the video and data file.
