These cables connect stand-alone equipment to an MP System. Analog outputs from chart recorders, preamplifiers, oscilloscopes, force plates, chromatographs, etc. can be connected to the UIM100C module. It's also possible to use these cables to connect amplifier outputs or D/A outputs to external equipment inputs. When signal isolation is required, use the INISO or OUTISO adapter with the cable. The other end of the isolation adapter connects to the appropriate MP unit channel via the HLT100C module. Select the cable number with the plug corresponding to your equipment's output or input jack. Use one cable per recording channel.
This is a multi-purpose adapter to connect a BNC cable to the digital I/O lines on the UIM100C or to the input of the DA100C. Also connects the STM100C to nerve conduction chambers (CBL102 required).
)
