All bar electrodes are nonferrous and consist of two tin electrodes in a watertight acrylic bar. The bar configuration permits easy electrode placement without disturbing electrode to electrode spacing. Bar electrodes are recommended for use when applying a stimulus, or recording a signal, during nerve conduction, somatosensory or muscle twitch recordings. When using bar electrodes for signal recording, a single ground lead (LEAD110 with EL503) is required.
When using the EL350S the "Shield" line should be placed into one of the two shield connectors on any biopotential amplifier. A ground lead is still required when using the EL350S.
The leads (3.8mm diameter x 61cm long) terminate in standard Touchproof connectors, which connect to any 100C-series Biopotential amplifier or stimulus isolation adapter (STMISOC/D/E).
CBL201 required for connection to 100A/100B-series amplifiers.
You might also be interested in the following items:
)
