TSD150 series active electrodes are designed for multiple-channel surface EMG measurements. The units incorporate a built-in high-gain amplifier with an integral 500 Hz lowpass filter. The unique design allows you to easily convert the surface contact electrodes to wire needle electrodes for intricate sub-dermal procedures. The TSD150 series active electrodes connect directly to the MP System via the HLT100C high-level transducer module. The TSD150 series are very easy to use—locate the position and hold in place with surgical tape (TAPE1).
TSD150A - Wide Electrode Placement 35 mm apart. COMPANION AMPLIFIER: NOT REQUIRED, CONNECTS TO HLT100C.
Grounding
A ground is only required if no other BIOPAC amplifier is connected to the subject with a ground lead.
A single ground lead (CBL201 and LEAD110A with EL503 electrode) to the UIM100C, is required when using one or more TSD150 series active electrodes.
)
