The EEG100C Electroencephalogram (EEG) Amplifier amplifies bioelectric potentials associated with neuronal activity of the brain and can be used to perform unipolar or bipolar EEG measurements. The amplifier output can be switched between normal EEG output and Alpha wave detection. The Alpha detection mode outputs a smoothed wave with a peak indicating maximal alpha activity (signal energy in the 8-13 Hz frequency range).
Use the AcqKnowledge software to automatically filter the raw EEG signals for Alpha, Beta, Theta, and Gamma wave activity and to provide a full frequency analysis of the data. The software will also remove any EOG artifact in the signals.
±10 V (referenced to amplifier ground) ±1500 VDC (referenced to mains ground)
Output Range:
±10 V (analog)
Input Voltage Range:
Gain 5000
Gain 10000
Gain 20000
Gain 50000
Vin ±2 (mV)
Vin ±1 (mV)
Vin ±0.5 (mV)
Vin ±0.2 (mV)
Noise Graph
The bottom graph (plotted in nV per root Hz) applies to all BIOPAC MP System biopotential amplifiers and should be interpreted in accordance with the user's bandwidth estimates.
)
