AC mode
AC mode indicates that a h igh-pass (HP) filter has been applied to the signal that you are recording. An HP filter removes the low-frequency components of a signal. The most common AC mode settings on BIOPAC amplifiers are 0.5 Hz HP and 0.05 Hz HP. In AC mode, the signal is centered around zero.
AC mode is useful in studying changes in the signal. AC mode is not appropriate for recording absolute measures or for detecting the baseline level of the signal.
Associated Applications
Associated Application Notes
Associated Disciplines
Associated Advanced Features
WHAT'S NEW
Biology research covers a wide variety of studies all aiming to understand living organisms...
Stay Connected